Features -
Information -
// echo str_replace($guranteeday, '30 days', $description); ?>
Small Wall Mount Bathroom Sink from Renovator's Supply features durable Porcelain Ceramic Construction with Porcelain Gloss Finish and Left Side Faucet Hole. Easy to Clean, Scratch and Stain Resistant. Easy Lag Bolt Installation Cute Elegant Little Sink for a great space saving design. Faucet and drain sold separately. Mounting bracket not required, installs with lag bolts only.
OVERALL: 8-1/4'' High x 20'' Wide x 9'' Proj.
BASIN: 4-1/4 Deep x 12-1/4 Wide x 6-1/2 Proj.
Installation Style: Wall Mount
Design Inspirations: Vintage / antique stylings
One (1) Wall Mount Porcelain Sink Features Authentic Renovator's Supply Logo for ANSI Compliance Requirements.
NO SALES TAX outside Massachusetts
WORLDWIDE shipping at your convenience
Length | Width | Height |
---|---|---|
9.13 Inches | 19.75 Inches | 8.25 Inches |
This Item is Available and ready to ship.
I needed a small sink for my bathroom and this fit the bill perfectly! Leaves plenty of room to move around the small bathroom and gets the job done! Nice quality, but it was a bit tricky to hang.
This beautiful little sink is perfect for my half-bath! I love the shape and it doesn't stick out very far from the wall which is very nice. It's hard to get good a good picture as the room is quite small but I've attached a few.
Works for a very small bathroom and great for kids. Our 1/2 bath is about 12 sq ft so we needed a tiny sink for our renovation this past summer. I call it our drinking fountain sink. Easy for the kids to access. We created a niche above it since there's very little room for a soap dispenser. Wish there was a little cabinet underneath but due to toilet accessibility we couldn't have one. Maybe one day I'll sew a little curtain and attach it underneath the sink. Definitely go for a low height faucet because a large one wouldn't look good with how tiny the sink is. Plumber had some difficulty installing the faucet as there isn't much room to work. We did put a board behind the wall during the renovation and then screwed into that to secure it to the wall. Well made and good product overall.
Cute little sink for my half bath. I have gotten a few compliments on it. It was packed very well. I would recommend this sink for any small bathroom that would need a small sink.
This is a beautiful sink. We added a 1/2 bathroom and used it. It is attached to the wall but we sat it on a rustic board to add space for soap. I also added the tile background with leftovers. Hope this helps answer questions!
Great style & size, BUT the underneath is NOT glazed white like the rest of the sink and the glaze has drips and splatter marks belly side/underneath with a greenish colored belly. For an exposed wall mount which this is, it's an eye sore that I'm trying to figured out a solution for...
well for my tiny/cramped washroom in the basement...it works well and buys me an additional 2 inches of stand up space...plus some style and function w/ soap holder and overflow holes....all went well - delivery, installation instructions, installation...um but being tiny - finding a proportional mixing faucet will be difficult....most single hole double feed faucets (that mix hot and cold)are for full sized sinks... (all faucets being 5 inches + tall)having bought one it looks really awkward... <just use a ruler to visually gauge>however for me - this being a basement work environment toilet and a washup...there are smaller more proportional faucets that appear more to scale...<but are not mixing are single hole single feed... 1/2" hot or cold replacement faucets>assuming you have 3/8" compression feed pipes for your old sink...all that is needed to match is a single (hot or cold) replacement 1/2" feed faucet<as shown>- will be -a 1/2" MNPT Tee to feed the faucet... from hot and cold feeds pipes (assuming you have shutoffs to regulate the flow and mix)plus (2) 3/8's compression to 1/2" FIP conversion connecting cables.. to convert the differing sizes. (also standard)assuming you have hot and cold shutoffs... on the 3/8" copper feed lines...and a (Std) 1/2" to 1/2" connecting cable for the Tee to Faucet connection.the conversion cables will send hot and cold from 3/8ths copper lines to the 1/2" Tee (mixing the water)and the Tee feeds mixed hot and cold to the faucet... regulated thru the shutoffs.the shutoff settings will adjust the mix (warmth and flow) out of the faucet... saving you an additional $70 to $80for a manufactured mixing valve...when done fire up the furnace/water heater and turn on faucet and adjust shutoffs for warm water...the single feed faucets works just like the ones at Home Depot and Walmart...are pre adjusted with more expensive mixers...ie no mixing faucets... (and no risk of scalding)
Sink is pretty and fits great in the bathroom. Giving 4 instead of five stars because it really should come with hardware that fits the grooves--it's not at all easy to take a sink with you shopping to guess what screws would work best. Also, there is a logo baked into the front in light blue which I would prefer not be there, but it's not terribly noticeable.
While I love the sink, my husband had a tough time getting it hooked up. Now that it's done, we love it.
What a nice sink! Bought this for the small bathroom in my new shop - just a place to cleanup after - well you know...I look forward to receiving the antique looking faucet and drain that i ordered for it so i can get it installed. Looks well made - nice mountings - came with mounting lags and washers. And even better - Made In The USA!
This was perfect for a renovation of my small bathroom in a rental home. There was a square sink that jutted out way too far into the walk space and this sink with rounded edges was perfect. The sink appears to be of higher quality than I was expecting for the price I paid. Installation wasn't too bad since it was replacing an existing wall mounted sink and had studs already to bolt sink into. Coupled with a modern faucet and a pop up drain and this bath sink brought a good modern look to a very outdated bathroom. Very happy with this purchase. The sink arrived very well packaged and protected in styrofoam (mine had the little styrofoam beads everywhere so maybe open outside).
Just perfect for a small space. Deep enough 43/4in to wash hand well without splashing water all over. Room for soap dispenser. Nice design. Being small the drain is close to the wall, but it was easy to install.UpdateAfter installing we realized that the bottom of the drain opening was uneven not allowing it seat properly and to leak. We requested a return and received approval. It was picked up the next business day and a new one arrived the day after that which was still a little flawed, but workable.It was easily reinstalled and is fine.
Bought this for a small powder room. The side mount faucet is good so you can get your hands into the sink without splashing all over, and its only 10-11 inches from the wall. Good item for small spaces. One thing I did: Comes with some fender washers to mount with lag bolts. I am using screw into the wall studs and I made a couple of larger backer plates layered with a cushion under the washers to make sure the mount is solid. The provided washers etc are probably fine but I always best and suspenders every thing. Overall the finish is pretty nice and the design is good. I saw comments about a trim ring for the overflow. I did not get one and its not needed. I would think all it would do it catch crud anyway.
Solid heavy duty porcelain. Easy install.
Nice little sink which hangs easily on the wall.