Black Cast Iron Shutter Dog Holders 6.5" L S Style with Screws Pack of 6

Product as described. Quick transaction

Exactly what we wanted...we added a little collar to help keep them straight, but the shutter dogs look great and are a great deal for the price...will order another set to do the back of the house!

great prices considering it costs for just 2 pack

A little thinner metal than expected.

I finally installed the new shutters I made for my windows and mounted these dogs. They look great and are sturdier than they appear in their Amazon listing, My only complaint is that they should be supplied with spacers so that the dog will stay flat on the shutter when mounted. Since the bolts are smaller than the holes in the dog, the dog leans sideways. Compared to other offerings, I notice that all are sold this way, so I'd still choose these for their quality for the price. The dogs are about 1/4" (estimated) thick, so I'm not concerned about them bending under normal use. Also a small dimensional installation sketch would be helpful, as one could easily locate these too far from or too close to the shutters impairing their function. Luckily I measured carefully before installing them to make sure that were in an optimal position.

These are great! I ordered from three different amazon vendors so I could compare the S Hook before purchasing for all windows. These are by far the best! They are quite heavy; they have a nice flat black paint and they have a subtle texture to them. So much nicer than the others which were either very thin; shinny or overly textured.

Changing review after install... proper install requires drilled lag bolts, cotter pins and washers.

The shutter dogs added character to my shutters

These are minimalistic in function. You’ll wish you had a stud behind every shutter in exactly the right place because the 5/16” lag bolt wants to bite into something.

These are an amazing quality shutter dog. Great price too. Would buy again, if I had more windows and shutters to do ??Thank you.

After receiving them I found them at Home Depot for half the price. They are hugh quality but expensive.

Great quality item....heavy duty and appears to be a good paint job. Time will only tell if it will or will not rust.

These shutter dogs were made in India, and in my opinion, are overpriced. My main complaint is with the mounting hardware. The mounting bolts don't have a hole drilled in them that can be used with a cotter pin and washer to keep the dog from sliding down the bolt. The shutter dogs sold by Stanley have better mounting hardware.

The shutter dogs are nice quality and heavy duty. The hardware is garbage. After pre-drilling and inserting masonry anchors, three of the first 6 lag bolts snapped as I socked then in place. I visited the local hardware store and used a combination of case hardened lag bolts and Tapcon lag screws to complete the installation. Rustoleum applied with a Q tip completed the aesthetics. My wife is happy! The shutters look great. Watch out for the hardware. Joe N

Absolutely made my shutters stand out. Very surprised at the quality, although they did need spacers. I cut 1/2" EMT conduit and painted them black.